Wow! A Junos post! Amazing.
We all know that the configuration on a Junos box is very hierarchical. Sometimes it doesn’t make a lot of sense, but it’s all a pretty cascade of code. One of the big messes that I’ve found is the VPN configuration hierarchy; there are way more items to configure than on an IOS device. To reinforce the stpes in my head, I thought I’d get some of the pieces into a post. These aren’t all the options, but it’s all you need to get a static IPSec tunnel up and running.
security
ike
proposal <<<< Think ISAKMP policy on Cisco
authentication-method <<<< PSK
dh-group
authentication-algorithm
encryption-algorithm
lifetime-seconds
policy
mode <<<< Main versus quick
proposal
pre-shared key <<<< The key and the proposal are bound together
gateway <<<< The remote peer
ike-policy
address
external-interface <<<< Think the if where you put the crypto map
ipsec
proposal <<<< Transform set…kinda
protocol (ESP)
authentication-algorithm
encryption-algorithm
lifetime-seconds
policy
proposal
vpn
bind-interface <<<< Complicated story
ike
gateway
proxy-identity <<<< Also complicated
local
remote
ipsec-policy
establish-tunnels immediately <<<< Awesome!
That’ll do, pig. I’ll fire off a real configuration post later. Feel free to add your pair of pennies since I’m a total Junos n00b.
Send any stocking stuffers questions my way.
Leave a Reply to Aaron Conaway Cancel reply