Aaron’s Worthless Words

I’ve had my ASA 5505 in place at home on my Comcast cable for a few weeks now, and, let me tell you, this thing rocks. I did, however, have a few problems finding a clear answer on how I could set up my VLANs. It turns out that the base license on the ASA 5505 comes with a few restrictions with regards to VLANning — in particular the number of VLANs and the number of trunks.

When you have the base license and the ASA is in routed mode (you have IPs on interfaces), you can have three VLANs configured. One of them, however, has to be configured to not forward to one of the other VLANs. I had to go over that a few times before I got what the doc was saying. Basically, you have two VLANs that are fully functional and one that can only initiate traffic to one of the others. At home, I consolidated my network down to three VLAN — outside (I’net), inside (Users), and a DMZ (Guests). The inside interface can initiate connections to both outside and the DMZ, but the DMZ can only talk to the outside VLAN. This is probably not a very big deal to an average user, but I’m a network guy and will add networks just to say I’ve got one more subnet than you do.

I also had some confusion over the number of trunks available on this guy. My Aironet 1231 is set up to tag multiple bridged VLANs to the Ethernet so that I could have multiple SSIDs on it with each in their own VLAN. I did this by making the switch port on the 2950 into a tagged trunk. With the base license on the 5505, you don’t get any trunks. I didn’t find any docs that said you couldn’t, but it’s pretty obvious from the “show version” info.

VLAN Trunk Ports : 0

This really puts a damper on my AP setup. I had to reconfigure it to just use a single, untagged bridged interface with a single SSID. If I wanted to implement the Aironet 1231 the way I had it beforehand, I would have to upgrade my license on the 5505. I’m not paying any more money for this thing, so I’ll have to get one of my lab APs in place for guests. Thank God for eBay.

So, how do you configure this thing? First, let decide on our VLANs — say VLANs 11, 12, and 13. The configuration is just like any PIX 7.X

interface Vlan11
description OUTSIDE
nameif outside
security-level 0
ip address dhcp setroute
!
interface Vlan12
description GUESTS
no forward interface Vlan13
nameif guests
security-level 10
ip address 192.168.13.1 255.255.255.0
!
interface Vlan13
description USER
nameif inside
security-level 100
ip address 192.168.14.1 255.255.255.0

The interface VLANs are what handles the IP addresses. We’ll put specific ports in the VLANs in a minute, so hold tight. The configuration is pretty self-explanatory with VLAN11 being the outside (I’net), VLAN 12 being the DMZ (guests), and VLAN13 being the inside (users).  There is, however, the one line that reads no forward interface Vlan13. This is the line  that makes dictates which VLAN is a DMZ with respect to the base license and that this VLAN (VLAN12) can’t initiate connections to VLAN13. You also might have noticed the line ip address dhcp setroute. You can read one of the earlier articles on that guy.

The last thing you do is to put ports in VLANs. The ports on the 5505 are labeled Ethernet0/0 - 7, and you treat them just like an IOS switch with the switchport access vlan X command. At home, you would plug your cable modem (or whatever) into one of the interfaces (say, Ethernet0/0) and put that port into VLAN11.

interface Ethernet0/0
switchport access vlan 11

Plug all your stuff in, put the ports in the right VLAN, and enjoy.

• Leave a comment... (1)

We all have these at our desks. Not the bluetooth guys for your [tag]phone[/tag] (we could talk about that for a while), but the 900MHz headsets that your company gave you for those long and annoying calls with the boss. These things rocks, but they are oh-so [tag]insecure[/tag].

A coworker who fields support calls has one, and we decided to see how far we could go with these. We were shocked to discover that he could field a call 2 full stories downstairs from his desk. I was able to take mine 1 story away without even a single bit of static in it. I’m sure I could have taken it farther, but construction kept me from going any farther.

So, what, you say? The [tag]headsets[/tag] can only talk to their own base station, right? Well, yeah, but that doesn’t really mean much. The correct question to ask is whether or not the data is encrypted, and the answer is no. Let’s do the math, then:

No Encryption + Long Range = DANGER!

Check out this article from Steve Stasiukonis of Secure Network Technologies, Inc. In his job as an auditor, Steve discusses how he was able to gather confidential information by listening to wireless headsets in an office and use that information to gain access to the building for three days!

The moral of the story: Protect your data — no matter what kind of data it is.

The second moral: Assume everything is insecure unless demonstrated to be secure.

• Leave a comment... (0)

That’s nothing compared to this. NetworkWorld has an article by John Cox about the [tag]NFL[/tag]’s Game Day Frequency Coordinators who make sure that everyone at the Super Bowl can use their [tag]wireless[/tag] devices without stepping on toes.  Imagine coordinating 2,000 different frequencies for use by everyone from the cleaning crew to the Air Force.

• (0)